Python Elasticsearch Client

Official low-level client for Elasticsearch. Its goal is to provide common ground for all Elasticsearch-related code in Python; because of this it tries to be opinion-free and very extendable.

For a more high level client library with more limited scope, have a look at elasticsearch-dsl - it is a more pythonic library sitting on top of elasticsearch-py.

Compatibility

The library is compatible with all Elasticsearch versions since 0.90.x but you have to use a matching major version:

For Elasticsearch 6.0 and later, use the major version 6 (6.x.y) of the library.

For Elasticsearch 5.0 and later, use the major version 5 (5.x.y) of the library.

For Elasticsearch 2.0 and later, use the major version 2 (2.x.y) of the library, and so on.

The recommended way to set your requirements in your setup.py or requirements.txt is:

# Elasticsearch 6.x
elasticsearch>=6.0.0,<7.0.0

# Elasticsearch 5.x
elasticsearch>=5.0.0,<6.0.0

# Elasticsearch 2.x
elasticsearch>=2.0.0,<3.0.0

If you have a need to have multiple versions installed at the same time older versions are also released as elasticsearch2 and elasticsearch5.

Installation

Install the elasticsearch package with pip:

pip install elasticsearch

Example Usage

from datetime import datetime
from elasticsearch import Elasticsearch
es = Elasticsearch()

doc = {
    'author': 'kimchy',
    'text': 'Elasticsearch: cool. bonsai cool.',
    'timestamp': datetime.now(),
}
res = es.index(index="test-index", doc_type='tweet', id=1, body=doc)
print(res['created'])

res = es.get(index="test-index", doc_type='tweet', id=1)
print(res['_source'])

es.indices.refresh(index="test-index")

res = es.search(index="test-index", body={"query": {"match_all": {}}})
print("Got %d Hits:" % res['hits']['total'])
for hit in res['hits']['hits']:
    print("%(timestamp)s %(author)s: %(text)s" % hit["_source"])

Features

This client was designed as very thin wrapper around Elasticsearch’s REST API to allow for maximum flexibility. This means that there are no opinions in this client; it also means that some of the APIs are a little cumbersome to use from Python. We have created some Helpers to help with this issue as well as a more high level library (elasticsearch-dsl) on top of this one to provide a more convenient way of working with Elasticsearch.

Persistent Connections

elasticsearch-py uses persistent connections inside of individual connection pools (one per each configured or sniffed node). Out of the box you can choose between two http protocol implementations. See Transport classes for more information.

The transport layer will create an instance of the selected connection class per node and keep track of the health of individual nodes - if a node becomes unresponsive (throwing exceptions while connecting to it) it’s put on a timeout by the ConnectionPool class and only returned to the circulation after the timeout is over (or when no live nodes are left). By default nodes are randomized before being passed into the pool and round-robin strategy is used for load balancing.

You can customize this behavior by passing parameters to the Connection Layer API (all keyword arguments to the Elasticsearch class will be passed through). If what you want to accomplish is not supported you should be able to create a subclass of the relevant component and pass it in as a parameter to be used instead of the default implementation.

Automatic Retries

If a connection to a node fails due to connection issues (raises ConnectionError) it is considered in faulty state. It will be placed on hold for dead_timeout seconds and the request will be retried on another node. If a connection fails multiple times in a row the timeout will get progressively larger to avoid hitting a node that’s, by all indication, down. If no live connection is available, the connection that has the smallest timeout will be used.

By default retries are not triggered by a timeout (ConnectionTimeout), set retry_on_timeout to True to also retry on timeouts.

Sniffing

The client can be configured to inspect the cluster state to get a list of nodes upon startup, periodically and/or on failure. See Transport parameters for details.

Some example configurations:

from elasticsearch import Elasticsearch

# by default we don't sniff, ever
es = Elasticsearch()

# you can specify to sniff on startup to inspect the cluster and load
# balance across all nodes
es = Elasticsearch(["seed1", "seed2"], sniff_on_start=True)

# you can also sniff periodically and/or after failure:
es = Elasticsearch(["seed1", "seed2"],
          sniff_on_start=True,
          sniff_on_connection_fail=True,
          sniffer_timeout=60)

Thread safety

The client is thread safe and can be used in a multi threaded environment. Best practice is to create a single global instance of the client and use it throughout your application. If your application is long-running consider turning on Sniffing to make sure the client is up to date on the cluster location.

By default we allow urllib3 to open up to 10 connections to each node, if your application calls for more parallelism, use the maxsize parameter to raise the limit:

# allow up to 25 connections to each node
es = Elasticsearch(["host1", "host2"], maxsize=25)

Note

Since we use persistent connections throughout the client it means that the client doesn’t tolerate fork very well. If your application calls for multiple processes make sure you create a fresh client after call to fork. Note that Python’s multiprocessing module uses fork to create new processes on POSIX systems.

SSL and Authentication

You can configure the client to use SSL for connecting to your elasticsearch cluster, including certificate verification and http auth:

from elasticsearch import Elasticsearch

# you can use RFC-1738 to specify the url
es = Elasticsearch(['https://user:secret@localhost:443'])

# ... or specify common parameters as kwargs

# use certifi for CA certificates
import certifi

es = Elasticsearch(
    ['localhost', 'otherhost'],
    http_auth=('user', 'secret'),
    port=443,
    use_ssl=True
)

# SSL client authentication using client_cert and client_key

es = Elasticsearch(
    ['localhost', 'otherhost'],
    http_auth=('user', 'secret'),
    port=443,
    use_ssl=True,
    ca_certs='/path/to/cacert.pem',
    client_cert='/path/to/client_cert.pem',
    client_key='/path/to/client_key.pem',
)

Warning

elasticsearch-py doesn’t ship with default set of root certificates. To have working SSL certificate validation you need to either specify your own as ca_certs or install certifi which will be picked up automatically.

See class Urllib3HttpConnection for detailed description of the options.

Logging

elasticsearch-py uses the standard logging library from python to define two loggers: elasticsearch and elasticsearch.trace. elasticsearch is used by the client to log standard activity, depending on the log level. elasticsearch.trace can be used to log requests to the server in the form of curl commands using pretty-printed json that can then be executed from command line. Because it is designed to be shared (for example to demonstrate an issue) it also just uses localhost:9200 as the address instead of the actual address of the host. If the trace logger has not been configured already it is set to propagate=False so it needs to be activated separately.

Environment considerations

When using the client there are several limitations of your environment that could come into play.

When using an http load balancer you cannot use the Sniffing functionality - the cluster would supply the client with IP addresses to directly connect to the cluster, circumventing the load balancer. Depending on your configuration this might be something you don’t want or break completely.

In some environments (notably on Google App Engine) your http requests might be restricted so that GET requests won’t accept body. In that case use the send_get_body_as parameter of Transport to send all bodies via post:

from elasticsearch import Elasticsearch
es = Elasticsearch(send_get_body_as='POST')

Running on AWS with IAM

If you want to use this client with IAM based authentication on AWS you can use the requests-aws4auth package:

from elasticsearch import Elasticsearch, RequestsHttpConnection
from requests_aws4auth import AWS4Auth

host = 'YOURHOST.us-east-1.es.amazonaws.com'
awsauth = AWS4Auth(YOUR_ACCESS_KEY, YOUR_SECRET_KEY, REGION, 'es')

es = Elasticsearch(
    hosts=[{'host': host, 'port': 443}],
    http_auth=awsauth,
    use_ssl=True,
    verify_certs=True,
    connection_class=RequestsHttpConnection
)
print(es.info())

License

Copyright 2013 Elasticsearch

Licensed under the Apache License, Version 2.0 (the “License”); you may not use this file except in compliance with the License. You may obtain a copy of the License at

Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an “AS IS” BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License.

Indices and tables